A digital force gauge measures tension and compression forces with a load sensor and shows the value directly on the display. The Mark-10 gauges can be used handheld or mounted on a test stand.
DISA AG Sarnen distributes Mark-10 and is the official European service center for Mark-10 products. This guide shows the criteria for choosing between Series 2, 3, 4, 5 and 7. You will find all gauges in the Digital force gauges category.
The Mark-10 series at a glance
Series 2
For simple tests.
10 N to 2500 N · ±0.5% · 500 Hz
Series 3
For higher dynamic requirements.
0.5 N to 2500 N · ±0.3% · 2000 Hz
Series 4
With memory and statistics.
0.5 N to 2500 N · ±0.2% · 3000 Hz
Series 5
For data acquisition with MESUR™ Lite.
0.5 N to 10 kN · ±0.1% · 7000 Hz
Series 7
For automated test processes with PC control.
0.5 N to 2500 N · ±0.1% · 14,000 Hz
Four criteria for your choice
1. Maximum force
Choose the measuring range according to the highest force in your test.
- Series 2: 10 N to 2500 N
- Series 3: 0.5 N to 2500 N
- Series 4 and Series 7: 0.5 N to 2500 N
- Series 5: 0.5 N to 10 kN
2. Accuracy
Accuracy is specified as a percentage of full scale:
- Series 2: ±0.5%
- Series 3: ±0.3%
- Series 4: ±0.2%
- Series 5 and 7: ±0.1%
3. Sampling rate
The sampling rate indicates how many times per second the gauge measures: Series 2 at 500 Hz, Series 3 at 2000 Hz, Series 4 at 3000 Hz, Series 5 at 7000 Hz and Series 7 at 14,000 Hz.
4. Interfaces
Series 2 and 3 have a USB interface. Series 4, 5 and 7 additionally offer RS-232, an analog output and a Mitutoyo output.
Comparison at a glance
| Series | Measuring range | Accuracy | Sampling rate | Interfaces |
|---|---|---|---|---|
| 2 | 10 N to 2500 N | ±0.5% | 500 Hz | USB |
| 3 | 0.5 N to 2500 N | ±0.3% | 2000 Hz | USB |
| 4 | 0.5 N to 2500 N | ±0.2% | 3000 Hz | USB, RS-232, analog, Mitutoyo |
| 5 | 0.5 N to 10 kN | ±0.1% | 7000 Hz | USB, RS-232, analog, Mitutoyo |
| 7 | 0.5 N to 2500 N | ±0.1% | 14,000 Hz | USB, RS-232, analog, Mitutoyo |
Calibration and service in Sarnen
As the European service center of Mark-10, we calibrate and repair the gauges in Sarnen. Our laboratory is accredited to ISO/IEC 17025 (SCS 0083) and calibrates force with an SCS certificate up to 50 kN.
Frequently asked questions
What are digital force gauges used for?
For example for quality testing in production, incoming goods inspection, tension and compression tests on components, laboratory and development tests, mobile on-site measurements and series and end-of-line testing.
Can I use the gauge handheld or on a test stand?
Both. The Mark-10 gauges can be used handheld or mounted on a test stand.
Can DISA calibrate the gauge?
Yes, in our accredited laboratory in Sarnen (SCS 0083), force with an SCS certificate up to 50 kN.
Advice and quotation
Tell us the maximum force, the required accuracy and whether you need a test stand or software. Our sales team will be happy to advise you: verkauf@disa.ch or +41 41 666 70 50.
