Torque Gauges and Torque Tool Testers

Torque gauges and tool testers from Mark-10 and Hios

DISA supplies digital torque gauges for clockwise and counterclockwise tests, testers for torque tools and gauges for closures. Measuring ranges extend from 7 cNm to 11.5 Nm.

DISA AG Sarnen is an official HIOS distributor in Switzerland. From the Japanese manufacturer, we supply precise electric screwdrivers for low torques as well as torque meters for testing screwdrivers. You receive advice and service directly from us in Sarnen, and we calibrate the torque meters in our accredited laboratory.

Your advantages at a glance

Devices from Mark-10 and Hios
Testing of screwdrivers, wrenches and closures
Accuracy ±0.3% with TT01, TT02 and TT05
Sampling rate up to 7000 Hz for peak values
Calibration in our own accredited laboratory (SCS 0083)

Guide: how to choose the right torque gauge →

Which torque gauge suits your test?

Choose the device by test object, measuring range, accuracy and interface. Our sales team will be happy to advise you.

Which torque gauges does DISA offer?

From Mark-10 the TT03 digital torque gauge, the TT02 tool testers, the TT05 universal tester and the TT03C and TT01 closure testers. From Hios the HP series tool testers. More in our torque gauge guide.

How do I test torque screwdrivers and wrenches?

With the Mark-10 TT02 series. It tests manual, electric and pneumatic torque screwdrivers, wrenches and other tools, has a 3/8″ square drive and is built for production environments.

Which measuring ranges are available?

TT03: 7 cNm to 1150 cNm. TT02 and TT05: 1.35 Nm to 11.5 Nm. TT01: up to 11.5 Nm. TT03C: 135 cNm to 1150 cNm. Hios HP series: models with 1 Nm and 10 Nm.

How accurate are the gauges?

TT01, TT02 and TT05 measure with ±0.3% and a sampling rate of 7000 Hz, so that torque peaks are reliably captured. TT03 and TT03C work at 2000 Hz.

How do I measure closure torque?

The TT01 series measures application and removal torque of bottle closures up to 11.5 Nm, with adjustable jaws for many container shapes. The portable TT03C tests cap closures without an additional fixture.

Which interfaces do the gauges have?

TT01, TT02 and TT05: analog, RS-232, USB and Mitutoyo. TT03, TT03C and Hios HP: USB. With the HP series, data transfer is standard and the torque curve is displayed graphically.

Can DISA calibrate the gauges?

Yes. Our calibration laboratory in Sarnen is accredited to ISO/IEC 17025 (SCS 0083) and calibrates torque gauges up to 1000 Nm. As the European service center of Mark-10, we also handle repairs. More on the calibration page.